|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MA4VAT900-1277T HMIC PIN Diode Variable Attenuator 0.8 - 1.0 GHz Features * * * * * * * Bandwidth: 0.80 GHz to 1.00 GHz <1.0 dB Insertion Loss, Typical 1.4:1 VSWR, Typical 24 dB Attenuation, Typical 40 dBm IIP3, Typical ( 1MHz Offset, @ +0dBm Pinc ) 0-1.8 Volt Control Voltage. User can add an External Resistor for higher voltage requirements. * RoHs Compliant Rev. V3 MLP 3mm Package--Circuit Side View Extra Features * * * * Usable Bandwidth: 0.60 GHz to 2.00 GHz 1.9 dB Insertion Loss, Max 2:1 VSWR, Max 20 dB Attenuation, Max PIN 1 PIN 16 PIN Configuration 1 PIN 1 2 3 4 5 6 Function GND GND GND GND GND RF2 GND GND PIN 9 10 11 12 13 14 15 16 Function DC2 GND GND DC1 GND GND RF1 GND Description and Applications M/A-COM's MA4VAT900-1277T is a HMIC MONLITHIC PIN Diode Variable Attenuator which utilizes an integrated 90 degree 3dB hybrid with a pair of Silicon PIN Diodes to perform the required attenuation function as Voltage (Current) is applied. This device operates from 0 to 2 Volts at 330 uA typical control current for maximum attenuation. The user can add external biasing resistors to the bias ports for higher voltage requirements as required. M/A-COM's MA4VAT900-1277T PIN Diode Variable Attenuator is designed for AGC Circuit Applications requiring: * Lower Insertion Loss * Lower distortion through attenuation * Larger dynamic range for wide spread spectrum applications 7 8 Center Paddle is RF and D.C. Ground 1. RF Input & RF Output Ports are Functionally Symmetrical Absolute Maximum Ratings @ +25 C 2,3 Parameter Operating Temperature Storage Temperature Junction Temperature RF C.W. Incident Power Reversed Current @ -30 V Control Current Maximum Ratings -40 C to +85 C -65 C to +150 C +175 C +33 dBm C.W. 50nA 5 mA per Diode 2. All the above values are at +25 C, unless otherwise noted. 3. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4VAT900-1277T HMIC PIN Diode Variable Attenuator 0.8 - 1.0 GHz Electrical Specifications @ +25 C Parameter No DC Bias RF Parameter Insertion Loss Input Return Loss Output Return Loss P1dB IIP3 Control Voltage DC Bias RF Parameter Maximum Attenuation Input Return Loss @ Max Attenuation Output Return Loss @ Max Attenuation Input IP3 Control Voltage @ Max Attenuation 0.80 GHz--1.00 GHz dB dB dB dBm V 21 17 17 15 24 20 20 18 1.80 V @ 330 uA 0.80 GHz--1.00 GHz dB dB dB dBm dBm V 11 11 30 37 1.0 14 14 33 40 0 V @ 0uA 1.2 - Rev. V3 Frequency Band Unit Min Typ Max Typical RF Performance Over Industry Designated RF Frequency Bands 4,5 Band Freq (MHz) RX AMPS TX 869-894 0.9 24 13 40 824-849 I. Loss (dB) 0.9 Att. (dB) 24 R. Loss (dB) 13 IIP3 (dBm) 40 Phase -Relative(Degree) -15 RX GSM TX 880-915 925-960 1.1 1.1 21 21 11 11 40 -15 40 4. All are typical values only. 5. Relative phase is the measured Insertion Phase difference between Insertion Loss and 15 dB Attenuation. (Please refer to the plots below) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4VAT900-1277T HMIC PIN Diode Variable Attenuator 0.8 - 1.0 GHz Plots of Typical RF Characteristics @ +25 C Typical Insertion Loss & Attenuation Typical Insertion Loss & Attenuation for MA4VAT900-1277 0 -5 30 25 Attenuation (dB) 20 15 10 5 Rev. V3 Typical Attenuation vs Voltage (@900 MHz) Typical Attenuation vs Volatge for MA4VAT900-1277 Attenuation (dB) -10 -15 -20 -25 -30 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 Voltage Applied (V) Frequency (G Hz) 0V/0uA 0.76V/49uA 1.05V/125uA 1.30V/185uA 1.50V/240uA 1.80V /330uA Typical Return Loss @ All Attenuation Levels Typical R eturn Loss at Attenuation levels for MA4VAT900-1277 0 -5 R eturn Loss (dB) -10 Typical IIP3 vs Attenuation Typical IP3 vs Attenuation for MA4VAT900-1277 50 40 IP3 (dBm ) 30 20 10 0 -15 -20 -25 -30 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 Frequency (G Hz) 0 3 6 9 12 15 18 21 24 27 Attenuation (dB) 800Mhz 900MHz 1000MHz 1.50V/240uA 1.80V330uA 0V /0uA 0.76V/49uA 1.05V125uA 1.30V185uA Typical Relative Phase Shift Per Attenuation (Voltage) Typical R elative phase shift vs Frequency per Voltage (Attenuation) for MA4VAT900-1277 0 R elative Phase Shift (degree) -20 -40 -60 -80 -100 -120 0.6 0V For Reference ONLY: With 0 External Bias Resistor, the following are Approximate Values: * Insertion Loss = 0 V @ 0 uA * 5dB Attenuation = 0.76 V @ 49 uA * 10dB Attenuation = 1.05 V @ 125uA * 15dB Attenuation = 1.30 V @ 185 uA * 20dB Anttenuation = 1.50 V @ 240 uA * Max Attenuation = 1.8 V @ 330 uA 2.0 0.8 0.76V 1.0 1.2 1.4 Frequency (G Hz) 1.05V 1.30V 1.6 1.50V 1.8 1.80V 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4VAT900-1277T HMIC PIN Diode Variable Attenuator 0.8 - 1.0 GHz Package PIN Designation, External Components, and Equivalent Circuit R in/out F C block Rev. V3 C =10pF block C = 10pF bias R external = 0 -O s hm C bias R bias INP T U C ontrol C urrent C bias G ND P addle block C R out/in F 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MA4VAT900-1277T |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |